instruNet

Insert the iNet-230, yet do NOT run instruNet World.exe. Run "Start \ Control Panels \ System" and then select"Device Manager". You should see the card listed under one of the following directories: yellow question mark next to "Pcmcia Card Services", yellow question mark next to"Other Devices" or "Data Acquisition Card". If you are not certain, double-click on the suspected entry and select Resources. The iNet-230 has one memory range that is 4FFF long (the iNet-200 PCI card has 4 memory ranges). Double-click on the iNet-230 entry, select the "Driver" tab, and press "Update Driver". It will ask you to install a driver. Please browse and navigate to "..Program files \ instruNet \ Pcmcia Win95 Driver \", and press Next to move through the installation process. It might say "Please insert disk labeled 'Program files \ instruNet \ Pcmcia Win95 Driver \' directory". At this point, you must navigate to "Progra~1 \ instru~1 \ Pcmcia~1 \ iNt95Pcm.vxd". You might need to type the "iNt95Pcm.vxd" name into the file name field, while "Progra~1 \ instru~1 \ Pcmcia~1 \" is selected in the Directory area. When done, the card should be listed under "Data Acquisition Cards" in the Device Manager.

To Update the iNet-200 Pci Windows 95/98/Me Driver...

This is the same as updating the Pcmcia driver, except one must navigate to "Program files \ instruNet \ PCI Win95 Driver \", navigate to "Progra~1 \ instru~1 \ PciWin~1 \ iNet95.vxd", and type the "iNet95.vxd" file name field.